Seat of the pants flying
-
- Posts: 721
- Joined: Thu Jun 11, 2015 6:46 pm
Well, on Friday I set a new high (low?) score for myself on the least-equipped [i]certified[/i] airplane I've flown yet. I didn't think I could beat seven instruments but this one had five, or maybe four. I had a hard time telling if the (non-sensitive) altimeter moved or not.
-
- Posts: 721
- Joined: Thu Jun 11, 2015 6:46 pm
[quote author=David MacRay link=topic=8973.msg24576#msg24576 date=1536160218]
Tachometer? Are you deaf?
[/quote]
I thought the tach was a little redundant too. A hot, humid day and a fat pilot pretty well call for full throttle all the time anyways.
Tachometer? Are you deaf?
[/quote]
I thought the tach was a little redundant too. A hot, humid day and a fat pilot pretty well call for full throttle all the time anyways.
-
- Posts: 3450
- Joined: Wed Apr 29, 2015 10:31 am
It's a gearhead thing. Admittedly, if you are used to an airplane
and you know where the throttle goes (eg fixed pitch) if the tach
breaks it's probably not a huge loss of information.
Reminds me of a guy I used to know. Had a helicopter, flew it
around like a pickup truck. He'd land beside a convenience store,
leave the engine running, zip inside for a pack of smokes and off
he would go. I have no idea how he had enough hands to smoke
while flying a helicopter.
Anyways, one day his airspeed indicator stopped working. Kind of
important during an auto. I offered to fish a piece of lock wire
through the pitot tube which was almost certainly plugged up by
mud daubers, but he declined my offer.
So, he flew around with no airspeed indicator. Then his MP gauge
stopped working. Vibration is terrible in helicopters. He kept
flying - said the governor did a pretty good job of that, he could
feel it moving in his hand.
Then, his attitude indicator failed, which I was somewhat in awe
of, because he would fly at night to his ranch and descend vertically
through a hole in the trees and hover taxi to his barn. I guess if
you stay low enough, you don't need any flight instruments.
And his light bulbs burned out, so I changed those, to make his
night flying easier. I have no idea how he did the descend-through
the-hole-in-the-trees with no lights. I installed LED replacements
in the hope that the filament vibration problem would go away.
Oh yeah, he kept landing it in snow and plugging up the breather tube
which didn't have holes drilled in it, and blow his crank seal. Did
that at least twice.
I've probably missed a bunch of stuff, but you get the idea. You
might criticize his maintenance, but gosh, could that boy [i]fly[/i].
and you know where the throttle goes (eg fixed pitch) if the tach
breaks it's probably not a huge loss of information.
Reminds me of a guy I used to know. Had a helicopter, flew it
around like a pickup truck. He'd land beside a convenience store,
leave the engine running, zip inside for a pack of smokes and off
he would go. I have no idea how he had enough hands to smoke
while flying a helicopter.
Anyways, one day his airspeed indicator stopped working. Kind of
important during an auto. I offered to fish a piece of lock wire
through the pitot tube which was almost certainly plugged up by
mud daubers, but he declined my offer.
So, he flew around with no airspeed indicator. Then his MP gauge
stopped working. Vibration is terrible in helicopters. He kept
flying - said the governor did a pretty good job of that, he could
feel it moving in his hand.
Then, his attitude indicator failed, which I was somewhat in awe
of, because he would fly at night to his ranch and descend vertically
through a hole in the trees and hover taxi to his barn. I guess if
you stay low enough, you don't need any flight instruments.
And his light bulbs burned out, so I changed those, to make his
night flying easier. I have no idea how he did the descend-through
the-hole-in-the-trees with no lights. I installed LED replacements
in the hope that the filament vibration problem would go away.
Oh yeah, he kept landing it in snow and plugging up the breather tube
which didn't have holes drilled in it, and blow his crank seal. Did
that at least twice.
I've probably missed a bunch of stuff, but you get the idea. You
might criticize his maintenance, but gosh, could that boy [i]fly[/i].
-
- Posts: 1259
- Joined: Wed Jun 03, 2015 3:00 pm
You are probably right in a way. I'm not diving and need to take a peek because, "that sounds like redline." in the flying clubs 172.
-
- Posts: 3450
- Joined: Wed Apr 29, 2015 10:31 am
Not sure anyone cares about reality, but you aren't about to
hurt a four-banger Lycoming by winding it up a bit. Most
anyone that flies a Pitts S1 will see 3200-3400 RPM. The guys
at Reno have been doing that for decades.
You want to fatally wound a Lycoming? Don't fly it. Let it
sit and corrode internally.
PS I want a tach so that in the absence of an airspeed indicator
I can set the power setting and know my fuel burn. Running out
of gas is an option for Ottawa flight instructors, but not the rest
of us.
hurt a four-banger Lycoming by winding it up a bit. Most
anyone that flies a Pitts S1 will see 3200-3400 RPM. The guys
at Reno have been doing that for decades.
You want to fatally wound a Lycoming? Don't fly it. Let it
sit and corrode internally.
PS I want a tach so that in the absence of an airspeed indicator
I can set the power setting and know my fuel burn. Running out
of gas is an option for Ottawa flight instructors, but not the rest
of us.
-
- Posts: 1259
- Joined: Wed Jun 03, 2015 3:00 pm
It's an option... you just don't feel like choosing it. I'm with ya.
-
- Posts: 721
- Joined: Thu Jun 11, 2015 6:46 pm
[quote author=Colonel Sanders link=topic=8973.msg24585#msg24585 date=1536204298]
You want to fatally wound a Lycoming? Don't fly it. Let it
sit and corrode internally.
[/quote]
That's true of any aero engine, including a forlorn little Continental that had to be replaced this past weekend due to neglect. Poor thing probably had fifty hours SMOH.
You want to fatally wound a Lycoming? Don't fly it. Let it
sit and corrode internally.
[/quote]
That's true of any aero engine, including a forlorn little Continental that had to be replaced this past weekend due to neglect. Poor thing probably had fifty hours SMOH.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 21568 Views
-
Last post by Colonel
-
- 3 Replies
- 1764 Views
-
Last post by Eric Janson