Beech 18 info...

Aviation & Pilots Forums, discuss topics that interest Pilots and Aviation Enthusiasts. Looking for information on how to become a pilot? Check out our Free online pilot exams and flight training resources section.
User avatar
Colonel
Posts: 2572
Joined: Wed Jan 15, 2020 10:02 pm
Location: Over The Runway

Wow!

I love the Beech 18. Just the sound of it starting on the ramp is a treat for the ears:



Hard to go wrong with two R-985's. Superb engines. Great sound! People ought to pay you, to make it!

Remember to lock the tailwheel before takeoff, and you need a left brake. Or so my best friend told me.

Image

My fetish aircraft would be a Twin Bonanza. Everyone hates them, but those geared Lycoming GO-480 engines make a truly orgasmic sound:

Image

If that doesn't give you a chubby, you have no soul.

EDIT - continuing on the topic of completely impractical fetish airplanes ...

Twin GO-480 Lycomings may not be a popular configuration these days, but I loved them as pushers:

Image

That needed to get from Brantford to Belize in a hell of a hurry, where the retired AC pilot had shacked up with the nanny, who smoked too much.

Saw it tied down at Chetumal, later. Funny, running across old friends like that.


45 / 47 => 95 3/4%
User avatar
Colonel
Posts: 2572
Joined: Wed Jan 15, 2020 10:02 pm
Location: Over The Runway


"This book is about flying freight in an aircraft known as the Beech 18. It includes my stories, and stories from others, about a time when small air cargo loads were flown around the US in this iconic airplane. It is about the pilots, their cargo loads, and the weather they faced. It is about those who survived and those who didn't, all in one of the most classic airplanes ever built." --Scott H. Gloodt, author and airline pilot.
Richard Gilbert:

Finally got a copy of "I'll Take The 18". What a trip down memory lane.

Got my multi-engine in an Apache but then went straight into the Beech 18. First on a nightly mail run from LAX to Palm Springs and Thermal, CA. Two turns per might. On weekends I flew jumpers out of Burbank to Baker then back at the end of the day. In my spare time, I worked as a flight instructor out of Long Beach or El Monte. Through the late '60s and early '70s, I flew a Beech 18 out of Bi-State Parks just across the river from St, Louis. Often hoping over to Lambert, and loading Carter Carburators for Chevy in Detroit (Downtown airport) or Chrysler in Wilmington. Then again brakeshoes to Ford in Louisville, Kansas City (Downtown airport), powdered paint to Buick in Flint, Kenosha for American Motors.

Engine failures, electrical failures, extreme aft CGs, blinding snow, moderate icing conditions, occasional ass chewings from a short-tempered controller. Challenging six-month proficiency rides (my usual examiner was a former corp pilot who flew the 18 and he loved to see sweat dripping out from under my instrument hood. As soon as we broke ground, he would pull one engine to zero trust and not allow me to use rudder trim. Then it was off to a holding point for 10 minutes followed by an ILS front and backcourse approaches, VOR, and ADF approaches... I always knew I had passed when he called "My plane". He would then spend about 20 minutes "wringing" the Beech 18 out and conclude with a textbook three-point landing.

The Beech 18 taught me more about flying than any instructor it seemed. If anything, I would say it was a capable and forgiving plane. No other experience in life has been as exciting or as fulfilling.

Thank you Scott!
20th Century pilots.

Pop Quiz: why no rudder trim?
45 / 47 => 95 3/4%
Nark
Posts: 631
Joined: Wed Jan 15, 2020 9:29 pm
Contact:

I’m guessing not as pronounced slipstream effect on the tail?
Twin Beech restoration:
www.barelyaviated.com
Slick Goodlin
Posts: 953
Joined: Thu Jan 16, 2020 3:24 am

Colonel wrote:
Thu Jul 01, 2021 3:39 pm
Pop Quiz: why no rudder trim?
‘Cuz it’s leg day in the cockpit, baby!
User avatar
Colonel
Posts: 2572
Joined: Wed Jan 15, 2020 10:02 pm
Location: Over The Runway

Rudder trim effectively decreases the size of your rudder, and increases Vmc.

A long time ago, I wrote this:

https://www.avweb.com/features_old/flyi ... -airplane/
45 / 47 => 95 3/4%
Slick Goodlin
Posts: 953
Joined: Thu Jan 16, 2020 3:24 am

Oh yeah, that too. I guess I’m just used to staying at least 50-ish knots above Vmc and not thinking too hard about it.
User avatar
Colonel
Posts: 2572
Joined: Wed Jan 15, 2020 10:02 pm
Location: Over The Runway

Yeah, it probably doesn't matter most of the time, but it's something that
a multi-engine pilot really should know about.



What I have learned in my life is that most fixed and rotary wing pilots
do ok, if nothing breaks and the wx isn't too bad.

But when something doesn't work perfectly (or the wx gets bad) look out.

If the aircraft is broken and in bad wx, well ...
45 / 47 => 95 3/4%
User avatar
Colonel
Posts: 2572
Joined: Wed Jan 15, 2020 10:02 pm
Location: Over The Runway

Found this. Doesn't do the T-bone justice, but it's a teaser:



Incredibly cool. The T-bone is kinda the grandfather of the King Air.

Love that blue sky.
45 / 47 => 95 3/4%
Nark
Posts: 631
Joined: Wed Jan 15, 2020 9:29 pm
Contact:

OSHA approved I’m sure:
195BEE49-E911-48D1-B8F4-376AE39207EB.jpeg
You do not have the required permissions to view the files attached to this post.
Twin Beech restoration:
www.barelyaviated.com
Big Pistons Forever
Posts: 211
Joined: Tue Feb 02, 2021 11:05 pm

Colonel wrote:
Sat Jul 03, 2021 3:06 am
Found this. Doesn't do the T-bone justice, but it's a teaser:



Incredibly cool. The T-bone is kinda the grandfather of the King Air.

Love that blue sky.
I always thought the T-Bone kind of looks like the parts bin airplane it is. IMHO the best place for a pair of GSO-480’s is on each wing of a Commander 680E. I was lucky enough to get a ride in an immaculately restored one 20 years ago. I still remember what a smooth solid ride it was, and as an added bonus you could channel your inner “High and the Mighty” on that overhead switch panel. :D
Post Reply
  • Similar Topics
    Replies
    Views
    Last post